Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window which is sagging. First, you'll need to open the windows so you can reach the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

upvc window repairs handles can also become loose. Often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. The most frequent reason for leaks in upvc window repairs near me windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is essential to keep in mind that when it is about upvc window repair near me window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in the breeze. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It is essentially a very simple process, but it's easier to do if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular manner or because of poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to provide assistance.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also lower the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become disaligned as a result of wear, creating gaps where the sash and frame meet. This can be easily fixed by giving them a good clean, but when they're beyond repair, it may be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it's possible to just give them a clean but in some instances it could be necessary to have them replaced.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them rather than repair them. So, if you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as you can.