Replacement Handles For UPVC Windows

uPVC window handles can loosen and fall off. Fortunately, replacing them is a simple job if you have the appropriate tools.

Check for the screws or pins that hold the handle in place to identify the kind of handle. Once you've identified them, remove them and carefully drag the handle away from its spindle.

Espag Handle

Espag handles are the most popular type of handle found on double glazed handles-glazing uPVC windows. They're flat with a cylindrical shape. They are typically made of uPVC however they can be made from other materials, based on the design and style of your window. The handles for internal bifold doors are also available in a range of colors and shapes to complement your decor.

The espag may also be called the cockspur or spade. It is a great option to replace a broken handle on older uPVC window. They are not as secure as modern designs but they provide a simple locking mechanism. The handle is fitted with a pair of round studs also known as mushrooms that are able to move up and down when the handle is turned. These studs are caught by an iron plate that is attached to the frame, referred to as the keep. The handle is also available in a cranked version, which allows more space for your hand and a more sleek appearance, or an inline model that some people prefer.

These kinds of uPVC window handles are typically found on older timber windows, as well as double glazed front door handles-glazed ones. They are typically constructed from aluminium or uPVC but can be constructed from other materials. Window handles made of espang can be locked with keys or using wedge blocks that are placed between the handle and the frame. They're also very easy to maintain and you can purchase replacement parts for them in the event that they break.

It is important to check the diameter of spindle at the back of your handle before selecting the correct espag handle. The spindle should have a maximum diameter of 7mm. Also, you should take a measurement of the height where the handle is attached to the window frame. If you use the correct handle size the window will shut with a tight seal.

Monkey tail Espag window handles are a fantastic choice for older windows. They're also suitable for modern windows and are available in right-hand or left-hand versions. They have a chic reeded end detail and a slim backplate that fit into the window frame. They are also lockable and have a good step height.

Venetian Handle

When you are replacing your window handles made of upvc replacement door handles There are a variety of styles of handle to choose from. There are many different styles of handles available which include Cockspur handles (also called Espag handles) blade or spade handles and tilt and turn handles. The type of handle you pick will depend on the style of windows you have as well as your personal preferences. Also, you should take into consideration the dimensions of the handle as well as the length of the spindle. It is essential that the handle is able to fit into the screw holes, and has the correct spindle.

A cockspur handle is among of the most sought-after kinds of replacement handles for upvc windows. They are available in a variety of colors and finishes. There are locking and non-locking versions. The primary difference is that the cockspur handle has the option of locking it with a key. The version that is keyed is typically utilized for properties that require high security and is more secure than a conventional handle.

Venetian handles are usually fixed by two bolts, much like Espagnolette handles. They are low-projection from the frame and won't poke blinds through like other window handles. They're also a great option for flats with high rises since they are able to be cleaned from the inside. These window handles are an excellent choice when you're looking for an elegant and practical replacement for your windows made of upvc.

Whatever type of window you have, there is a handle that will suit the window. When choosing a replacement handle, you must take into account the size and shape that the screw holes are, the step height as well as the length of the spindle and the handle. The handle should be able support the weight of the window when it's closed.

A tilt and turn handle is ideal for windows made of upvc that open from the side. It has a dual function and allows you to both tilt and turn the window, which is useful for ventilation, cleaning and security. It's also easy to operate, even using just one hand. The handle can be used to lock the window in a wide-open position or be swiveled to enjoy the fresh air without worrying about whether burglars will get inside.

Pear Drop Handle

If you've got a damaged uPVC window handle or lock it is likely that you'll need to replace it. You can do this yourself. First, shut your window and then take out the screw that is located on the base handle. This will reveal two more screws, and once they are removed, the handle should disappear. The multipoint lock can be removed by removing two screws. After the new handle has been made, screw it in it. If your handle comes with a screw cap it is recommended to replace it.

Espagnolette handles are typically employed on uPVC window frames. They are easily identified by their flat strip design and can be used with multipoint locks placed around the frame for industry-leading home security. They can be set to open left or right, and are available in a range of finishes.

Cockspur handles are a more traditional design of handle. They work differently to espagnolette handles and are a popular choice for older improvements and those who prefer a more traditional appearance. These handles have shafts that run through the handle to the gearbox. This is then turned into a series of shootbolt rods which secure the window.

Pear drop handles are a more modern alternative to cockspur handles and offer a similar level of security. They're a great choice for those who want to modernize their windows by installing a modern handle that's still a good to match the historical background of their home.

The Cornish Heritage Tear Drop Espag handle is a tribute to 19th Century Ironmongery. It is ideal for windows with a heritage style and will give your home an elegant exterior. This handle can be used with an operating stay that has a tear drop and dummy stays to create a completely matching heritage window.

Selecting the best replacement handle for your uPVC window isn't easy. Our handy guide and helpful tips will help you get the best results. Whether you're replacing your existing uPVC handle and lock, or re-designing the entire window set, you can trust that Bridgewater Glass will help you find the perfect solution that will fit your home.

Handle that tilts and turns

Tilt and turn handles are used on double-glazed windows that swing to the outside and tilted back or down for ventilation. The handle is rotated, and a locking mechanism activates when the window is slid in either direction. These windows are popular in Europe and provide better ventilation and enhanced security, particularly when children are present. To ensure functionality and security, the handle that replaces the uPVC u-turn handle should be compatible both with the window's design as well as the locking mechanism.

Tilt-and turn windows are typically made out of upvc replacement door handles or aluminum and a timber frame being a possible alternative for homeowners seeking a more traditional look and feel to their home. UPVC frames are the most value and are long-lasting as well as energy efficient and require minimal maintenance. Aluminum frames are, however are a more costly choice, but provide greater strength and resistance to corrosion.

The uPVC tilt and turn handle works in a similar way as an espagnolette handle, but is much heavier and bulkier because they are primarily used on larger windows, usually up to the size of a door. They are also more durable because they are able to withstand more forces when the window opens to the inside or is tilted.

When it comes to replacing a tilt and turn handle, the most important thing to consider is that the handle is able to be locked into one of four positions to stop the window being opened fully into the room. It is possible to achieve this with a lock key. This is especially helpful when there are young children around, as it prevents them from opening the windows too much.

The majority of tilt-and-turn window handles will come with this feature as standard. Cheap Chinese products are not the only exception. Sealco Scotland stocks a range of high-quality tilt and turn handle designs from manufacturers like Hoppe Trojan and Sensei.

It is essential to measure your existing handle before purchasing a tilt-and-turn window handle. This will help you determine the best design. You'll need to determine the distance between the screw fixing holes which are usually 43mm from centre to centre. Some handles could have screws hidden by covers or a spring loaded backplate, which means you'll need to gently remove these before you can reveal the fixing locations.